Product Line

Dampney Engineered Coatings

Home » Endcor » Product Details

Endcor® 460

Rust Converter

Rust Conversion used on steel surfaces and can be topcoated. Not intended for high temperatures.
Data Sheet

A water-borne copolymer that is designed for application to rusted ferrous metal surfaces. When properly applied the coating converts the rusted surface to a dark, stable organic iron compound. This product has a low permeability factor and is impermeable to oxygen and moisture while providing a rust free surface ready for priming or finish painting

It converts and primes rusted surfaces in one operation; dries to a hard, gloss finish combines excellent flexibility, toughness and impact resistance.

• Outstanding adhesion to substrate
• Low permeability to water vapor and oxygen
• VOC compliant
• Tolerance for lower standards of surface preparation
• User friendly - single package system
Common Uses
• Used as a primer over surfaces which have minimal surface preparation
• Converts rust into a primed surface ready for priming or topcoating
• For use in industrial, marine, chemical, refineries, and pipeline

Specification Data

Generic Type
Water-borne Copolymer
Temperature Resistant After Cure
120°F (49°C)
Volume Solids
Dry Film Thickness per coat
2-3 mils (50 - 75 microns)
Wet Film Thickness per coat
5-7 mils (125 - 175 microns)
Theoretical Coverage
687 @ 1 mil
Dry to Touch
30 minutes
Dry Time to Recoat
40-60 minutes
Dry Time to Ship
48 hours
VOC Content
0.52 lb./gal. (62 g./l.)

Application Instructions

Surface Preparation
Apply Endcor 460 only over properly prepared surfaces. All loose rust should be removed by scraping, wire brushing and washed with water. Remove oil and grease by solvent wiping or cleaning with an alkaline detergent. Remove loose and flaking rust, mill scale and old paint by power or hand wire brushing, chipping and scraping. Follow by fresh water rinse to remove all residues.
Application Temperature
60-85°F (16-29°C)
  To place orders and/or obtain pricing information contact:

Dampney Company
85 Paris Street
Everett, MA 02149
TEL: (617) 389-2805
Request More Information
* denotes mandatory field

Product Lines

Industrial high-temperature protective coatings.
Industrial Coatings
Coatings for resistance to boiling water/steam and waterside corrosion.
Dymacryl masonry stains have a proven record of protecting surfaces against damage caused by water absorption.
Corrosion resistant coatings include silicone alkyd, thermo setting epoxy,inorganic zincs, acrylic urethane, water borne silicone, coal tar epoxy, elastomeric, cold galvanizing compound.
Single package high build ELASTOMERIC coating and vapor barrier.
Underwater epoxy coating, solvent free. Used for epoxy coatings, floor coatings and concrete restoration projects. Skid resistant epoxy broadcast floor system.
Alvin Products
Offering a complete line of quality problem-solving products for industry.
Stove Paint
Dampney has served the home and hearth industries for many years providing high performance heat resistant coatings to meet their ever changing needs. Visit for more information.
Temperature Indicating Coatings
Silicone coatings designed primarily for temperature indicating applications requiring an irreversible sharp visual color change.