Test

884-083 Green
Temperature Indicating Paint
Temperature Indicating Coating
Thermo Indicative Paint
Thermal Indicating Paint

Apexior 1
A steam resistant coating/lining formulated to protect carbon steel surfaces. Apexior Number One is designed for applications ranging from 200°F (93°C) up to 700°F (371°C) continuous. Typical applications for the product are carbon steel kilns, steam piping, steam traps, steam
coils and interior of boilers.

Apexior 3C
Apexior Number 3 is a single component, easy to apply air cure coating specifically formulated for the waterside corrosion prevention of metal surfaces. It has outstanding wetting properties and adheres well to power tooled cleaned areas. Apexior Number 3 is resistant to continuous immersion in fresh or salt water as well as frequently wet or high humidity environments.

Dymacryl 1100 Sierra Tone
Dymacryl Masonry Stains are formulated to beautify, extend the life, and preserve the appearance of above ground concrete and masonry. They impart excellent water repellency to a wide variety of surfaces, improving their resistance to the effects of freeze-thaw cycling and other types of damage and deterioration caused by excess water absorption. Dymacryl Masonry Stains are based on a combination of 100% acrylic polymers and copolymers, color stable inorganic pigments, and surface penetrating agents. They have outstanding resistance to weather and chemicals, have excellent penetrating properties and are resistant to peeling and flaking. They exhibit superior color retention and are resistant to fading, discoloration, and yellowing upon exposure to weather and ultraviolet radiation from sunlight.

Endcor® 450
Rust Rinse 450 is a concentrated phosphoric acidbased corrosion removing and metal conditioning compound. When diluted with water and applied to metal surfaces it will remove rust and provide a slight etching action for ferrous and nonferrous metals. It converts the surface of steel to insoluble salts of phosphoric acid for the purpose of inhibiting corrosion and improving the adhesion and performance of paints and/or corrosion preventive compounds.

Endcor® 4600C
Endcor 4600C series coating is a two component, semi-gloss high-performance coating based on a chemically cross-linked polyurethane polymer. Endcor 4600C exhibits outstanding toughness, durability, chemical and weather resistance with increased gloss and color retention as compared to acrylic urethanes.
Endcor 4600C provides an attractive appearance for metal and concrete surfaces exposed to corrosive chemical, industrial and marine environments.

Endcor® 560C
Endcor 560C is a multipurpose alkyd primer used for new construction and maintenance applications. It can be applied over a wide range of coated and uncoated surfaces without lifting or softening the existing coating.

Endcor® 8898
A high-performance, high solids, self priming, high gloss, hard, durable coating for use on cast steel surfaces. Complies with state VOC (Volatile organic content) emission control regulations. Compared to conventional alkyd paints it provides a wide range of improved properties, including: significantly improved gloss retention and chalking resistance, reduce color fade, continuous film integrity, and temperature resistance.

Epodur 793
A high solids low viscosity 100% solids epoxy formulated for deep penetration into properly prepared concrete surfaces to seal and damp-proof. It is also used as a bonding primer for other primers and finish coatings that will be applied over masonry surfaces.

Epodur® 1870
Epodur 1870 protects metal surfaces with a film of sacrificial zinc in a manner similar to hot dip galvanizing. It is a zinc-rich coating based on an epoxy-ester resin. The dried film contains 93% zinc by weight. Epodur 1870 protects steel surfaces subjected to a wide variety of corrosive influences, and is particularly useful for recoating or spot-priming weathered or damaged galvanized surfaces. It has excellent recoating properties.

Epodur® 1890
Epodur 1890 weld thru primer is a ready-to-use weldable coating. Apply to metal surfaces in order to provide a rust proof surface and maintain quality welds. This coating offers increased heat resistance, reduced porosity and pin-holing as compared to traditional weld-able coatings. Epodur 1890 is a versatile primer easily applied to improve weld efficiency preventing the formation of corrosion that forms between welded substrates especially during prolonged storage periods.

Protexior® 793
A high solids low viscosity 100% solids epoxy formulated for deep penetration into properly prepared concrete surfaces to seal and damp-proof. It is also used as a bonding primer for other primers and finish coatings that will be applied over masonry surfaces.

Stove Paint
Thurmalox® Stove Paint, a high quality, premium coating, is available in a palette of decorative colors. Thurmalox Stove Paint takes stove restoration beyond traditional black; the line includes a rainbow of colors to match stove, stovepipe, and hearth accessories to a room’s décor.

This fast drying, long lasting, heat resistant silicone coating withstands intense heat up to 1200F and resists blistering, peeling or flaking. It is an exceptional protective finish for numerous metal items that become hot while in use. Thurmalox Stove Paint enhances stoves and stovepipes, fireplace andirons, screens and grates, barbecues, gas grills and hibachis.

Thurmalox® 200
Thurmalox 200 series coatings are single component heat resistant coatings based on modified silicone resins and thermally stable pigments. They are formulated specifically to protect metal surfaces operating to 500ºF (260ºC).

Thurmalox® 200C
Thurmalox® 200C Air Dry Series VOC Compliant Silicone Coatings Heat Resistant to 500°F. Standard and Custom Colors

Thurmalox® 217
Thurmalox 217 series is a single component heat resistant coating based on modified silicone resins and thermally stable pigments. It is formulated to protect surfaces operating to 450F (232C). Thurmalox 217 series is intended as a finish coat over Thurmalox 218/219 when it will not be insulated and will be exposed to ultra violet light and the environment. The 217 series topcoat system provides outstanding adhesion, film integrity, color stability, corrosion-weathering, and resists thermal shock throughout its entire temperature range.
Thurmalox 217 series coatings are available in a wide range of standard (see Master Color Card) and custom colors.

Thurmalox® 218
For under insulation, boiling water immersion grade, apply directly to hot steel up to 350F(176C) with service temperatures up to 450F (232C)

Thurmalox® 219
For under insulation, boiling water immersion grade, apply directly to hot steel up to 350F(176C) with service temperatures up to 450F (232C)

Thurmalox® 240
Thurmalox 240 series coatings are high temperature coatings based on proprietary silicon ceramic matrix and thermally stable pigments. They are recommended for application to difficult-to-protect metal surfaces operating at temperatures from 1100ºF (593ºC) to 1400ºF (760ºC). Thurmalox 242-02 high temperature coating is heat resistant to 1600ºF. Thurmalox 240 series coatings are resistant to corrosion, chemical attack, weathering and severe thermal shock. Contrary to normal expectations in high temperature applications, service life of applied Thurmalox 240 series coatings is extended where operating temperatures exceed 1000ºF (538ºC). Thurmalox 240 series coating meets the military performance criteria for MIL-P-14105. Thurmalox 240 series coatings are available in some standard and custom colors.

Thurmalox® 242
Thurmalox 242 Silicone Ceramic series coatings are for use on process equipment that will operate at temperatures from 1000ºF to 1600ºF. These coatings are resistant to corrosion, weathering and thermal shock. Contrary to normal expectations in high temperature applications, service life of applied Thurmalox 242 series coatings is extended where operating temperatures exceed 1000ºF (538ºC). Thurmalox 242 series coating meets the performance<br />
criteria for MIL-P-14105.

Thurmalox® 245
Thurmalox 245 Primer is a high temperature, corrosion resistant primer formulated from silicone resins and zinc dust. Thurmalox 245 Primer provides outstanding corrosion protection for metal surfaces operating at temperatures from 500ºF (260ºC) to 1000ºF (538ºC), with peaks to 1200ºF (649ºC). Thurmalox 245 is the primer for both Thurmalox 230 Series and Thurmalox 280 Aluminum heat resistant topcoats. These primer/topcoat systems have excellent intercoat adhesion and are able to withstand severe thermal shock throughout the entire temperature range.

Thurmalox® 245C
Thurmalox 245C Primer is a high temperature, corrosion resistant primer formulated from silicone resins and zinc dust. Thurmalox 245 Primer provides outstanding corrosion protection for metal surfaces operating at temperatures from 500ºF (260ºC) to 1000ºF (538ºC), with peaks to 1200ºF (649ºC). Thurmalox 245 is the primer for both Thurmalox 230 Series and Thurmalox 280 Aluminum heat resistant topcoats. These primer/topcoat systems have excellent intercoat adhesion and are able to withstand severe thermal shock throughout the entire temperature range.

Thurmalox® 250
Selective Black, silicone-based paint which collects heat more efficiently than ordinary black paint and resists out gassing to 400F.