Product Type: Endcor

Endcor® 450

Dennis Aikman — Sun, 23 Sep 2012 12:45:00 GMT

Product Name: Endcor® 450
HTML Title: Rust Rinse, Metal Conditioner
SKU: 450
Short Description: Rust Rinse, Metal Conditioner
Prop 65 Warning: False
SDS: 450 SDS 09252020
Data Sheet: Endcor_450
Description: Rust Rinse 450 is a concentrated phosphoric acidbased corrosion removing and metal conditioning compound. When diluted with water and applied to metal surfaces it will remove rust and provide a slight etching action for ferrous and nonferrous metals. It converts the surface of steel to insoluble salts of phosphoric acid for the purpose of inhibiting corrosion and improving the adhesion and performance of paints and/or corrosion preventive compounds.
Generic Type: Phosphoric acid pretreatment
Common Uses: • Conditioner for ferrous and nonferrous metals prior to painting
• Rust remover for ferrous metals
• Blasted or pickled steel
• Galvanized steel or aluminum surfaces
Features: • Excellent wettability
• Quick rust penetration
• Uniform deposition of insoluble phosphate coating
• Provides uniform etching of surface

Rust Rinse 450 meets the requirements of Military Specification MIL-C-10578D, Type I, Corrosion Removing and Metal Conditioning Compound (Phosphoric Acid Base).
Temperature Resistant After Cure: 500°F (260°C)
Surface Preparation: SSPC-SP1
Components: 1
Volume Solids: 36%
Application Temperature: 50-120°F (10-49°C)
Dry to Touch: Not applicable
Dry Time to Recoat: 2 hr @ 50°F (10°C); 1 hr. @ 70°F (21°C);

Endcor® 460

Dennis Aikman — Sun, 23 Sep 2012 12:56:00 GMT

Product Name: Endcor® 460
HTML Title: Rust Converter
SKU: 01-460
Short Description: Rust Conversion used on steel surfaces and can be topcoated. Not intended for high temperatures.
Prop 65 Warning: False
SDS: 460 SDS 09252020
Data Sheet: Endcor_460
Generic Type: Water-borne Copolymer
Common Uses: • Used as a primer over surfaces which have minimal surface preparation
• Converts rust into a primed surface ready for priming or topcoating
• For use in industrial, marine, chemical, refineries, and pipeline
Features: • Outstanding adhesion to substrate
• Low permeability to water vapor and oxygen
• VOC compliant
• Tolerance for lower standards of surface preparation
• User friendly - single package system
Temperature Resistant After Cure: 120°F (49°C)
Surface Preparation: Apply Endcor 460 only over properly prepared surfaces. All loose rust should be removed by scraping, wire brushing and washed with water. Remove oil and grease by solvent wiping or cleaning with an alkaline detergent. Remove loose and flaking rust, mill scale and old paint by power or hand wire brushing, chipping and scraping. Follow by fresh water rinse to remove all residues.
Components: 1
Volume Solids: 43%
Dry Film Thickness per coat: 2-3 mils (50 - 75 microns)
Wet Film Thickness per coat: 5-7 mils (125 - 175 microns)
Theoretical Coverage: 687 @ 1 mil
Application Temperature: 60-85°F (16-29°C)
Dry to Touch: 30 minutes
Dry Time to Recoat: 40-60 minutes
VOC Content: 0.52 lb./gal. (62 g./l.)
Dry Time to Ship: 48 hours
Description HTML Content:

A water-borne copolymer that is designed for application to rusted ferrous metal surfaces. When properly applied the coating converts the rusted surface to a dark, stable organic iron compound. This product has a low permeability factor and is impermeable to oxygen and moisture while providing a rust free surface ready for priming or finish painting

It converts and primes rusted surfaces in one operation; dries to a hard, gloss finish combines excellent flexibility, toughness and impact resistance.

Endcor® 560C

Dennis Aikman — Sun, 23 Sep 2012 13:14:00 GMT

Product Name: Endcor® 560C
HTML Title: Multipurpose Alkyd Primer
SKU: 560C
Short Description: Multipurpose alkyd primer used for new construction and maintenance applications.
Prop 65 Warning: False
SDS: 560C SDS 05042021
Data Sheet: Endcor_560C
Description: Endcor 560C is a multipurpose alkyd primer used for new construction and maintenance applications. It can be applied over a wide range of coated and uncoated surfaces without lifting or softening the existing coating.
Application Method: Spray
Generic Type: Modified Alkyd
Color: Gray
Common Uses: • Shop primer for structural steel
• Structural steel-bridges, industrial plants
• Power plant structures, smoke stacks
• Refinery and chemical process plant structures
• Water and sewage works structures
• Paper mill structures
• Storage tank exteriors-water, petroleum, etc.
Features: • Outstanding adhesion to all substrates
• Excellent intercoat adhesion
• Compatible with numerous topcoat types
• Bonds well to old adherent paint films
• Prevents corrosion and undercutting
• Resists lifting by strong solvents
• High film build
Intermittent Peak Temperature: 200°F (93.3C)
Continuous Temperature: 150°F (65.6°C)
Surface Preparation: SSPC-SP-6
Components: 1
Volume Solids: 49%
Application Temperature: > 50°F (10°C)
Dry to Touch: 8-10 hours
Dry Time to Recoat: 24 hours
VOC Content: 3.44lb./gal. (412.8 g/l)
Dry Time to Ship: 72 hours
Description HTML Content:

An economical rust inhibitive primer for exterior and interior steel surfaces subjected to industrial and marine environments. It exhibits strong intercoat adhesion, serving as an outstanding tiecoat between previously applied adherent paint and chemically resistant topcoat systems containing active solvents.

Endcor® 700C

Dennis Aikman — Sun, 23 Sep 2012 12:33:00 GMT

Product Name: Endcor® 700C
HTML Title: Epoxy Polyamide Coating
SKU: 700C
Short Description: Epoxy-Polyamide Coating High Solids VOC Compliant
Prop 65 Warning: False
SDS: 700C A SDS 04272020
SDS - Part B: 700C B SDS 12292020
Data Sheet: Endcor_700C
Application Method: Spray|Brush|Roll
Generic Type: Epoxy-polyamide
Color: Colors|Custom Colors
Common Uses: Recommended Uses

• Structural steel
• Concrete
• Piping and tank exteriors
• Machinery and equipment
Continuous Temperature: 350°F (177°C)
Immersion: Yes
Surface Preparation: Prepare surface by methods suitable for exposure and service conditions.
Components: 2
Volume Solids: 67% (varies with color)
Dry Film Thickness per coat: 6 - 8 mils
Wet Film Thickness per coat: 8 - 11 mils
Theoretical Coverage: 1,070 mil. sq. ft./gal.
Application Temperature: 65-85°F (18-29°C)
Dry to Touch: 6 hours
Dry Time to Recoat: 24 hours
VOC Content: .83 lb/gal (99.6 g/l)

Endcor® 745

Dennis Aikman — Sun, 07 Oct 2012 15:40:00 GMT

Product Name: Endcor® 745
HTML Title: Polyamide-cured Epoxy Based Coating
SKU: 745
Short Description: Endcor 745 is a two-component, polyamide-cured epoxy based coating. It provides a tough, adherent, high-gloss, friction and corrosion resistant surface.
Prop 65 Warning: False
SDS: 745A SDS 04042021
Data Sheet: Endcor 745 bulletin
Components: 1

Endcor® 750C

Dennis Aikman — Sun, 07 Oct 2012 15:35:00 GMT

Product Name: Endcor® 750C
HTML Title: High Solids Low VOC Polyamide Epoxy Primer
Short Description: High Solids Low VOC Polyamide Epoxy Primer
Prop 65 Warning: False
SDS: 750C A SDS 2016
SDS - Part B: 750C B SDS 09102021
Data Sheet: 750C Jan 2013
Components: 1

Endcor® 772

Dennis Aikman — Sun, 07 Oct 2012 15:02:00 GMT

Product Name: Endcor® 772
HTML Title: Black Coal Tar Epoxy-Polyamide Coating
SKU: 772
Short Description: Endcor 772 is a two-component, polyamide cured, coal tar epoxy coating, recommended for long-term
protection against corrosion under extreme conditions. High-build, non-sagging films up to 16 mils thick can be achieved with a single-coat spray application.
Prop 65 Warning: False
SDS: 772A SDS 06052018
SDS - Part B: 772B SDS 11082021
Data Sheet: 772 bulletin
Components: 1
Description HTML Content:

Endcor 772 is a two-component, polyamide cured, coal tar epoxy coating, recommended for long-term protection against corrosion under extreme conditions. High-build, non-sagging films up to 16 mils thick can be achieved with a single-coat spray application.

Endcor 772 protects steel surfaces subjected to immersion in fresh or salt water, exposure in tidal or splash zones, or burial in soil. It is effective on the interiors of tanks and lines containing brine, crude oil, petroleum products, sewage or strong alkalies. It is resistant to a wide range of chemical fumes, mists and splashes. Suitability for prolonged immersion in specific chemicals should be determined by tests prior to use.

Endcor® 835

Dennis Aikman — Sun, 07 Oct 2012 15:36:00 GMT

Product Name: Endcor® 835
HTML Title: Zinc Rich Primer
Short Description: Zinc Rich Primer
Prop 65 Warning: False
SDS: 835A SDS 07052022
SDS - Part B: 835B SDS 2016
Data Sheet: 835
Components: 1

Endcor® 8894

Jim Dworchak — Wed, 29 Oct 2025 17:27:00 GMT

Product Name: Endcor® 8894
HTML Title: Endcor® 8894
Short Description: A high performance, high solids, self-priming durable coating designed for application to hot surfaces between 90-300°F (32-149°C).
Tags: hot apply, no shutdown, silicone enamel, self-priming, dtm
Prop 65 Warning: False
Data Sheet: 8894
Available Sizes: 1 Gallon|5 Gallon
Components: 1

Endcor® 8895 Primer

Jim Dworchak — Mon, 13 Oct 2025 16:26:00 GMT

Product Name: Endcor® 8895 Primer
HTML Title: Endcor® 8895 Primer
Short Description: Endcor® 8895 is a VOC compliant 100% air dried primer with a maximum heat resistance up to 500°F (260°C).

Tags: hot mix asphalt plant paint,epoxy ester primer, silicone copolymer, siliconized epoxy ester, high heat primer, silicone alkyd, silicone alkyd primer, hot mix asphalt,
Prop 65 Warning: False
SDS: 8895 SDS 2025
Data Sheet: 8895 2025
Description: Endcor® 8895 is a single component universal high temperature primer for use on OEM equipment and hot process equipment in a multitude of industries. Endcor 8895 provides outstanding corrosion protection, adhesion, film integrity and thermal shock resistance when applied to properly prepared surfaces.
Application Method: Spray|Brush|Roll
Generic Type: Silicone Modified Copolymer
Color: Off White|Oxide Red
Available Sizes: 1 Gallon|5 Gallon
Common Uses: • Valves, Pumps, and Piping
• Engines, Manifolds, Exhausts and Silencers
• Furnaces, Kilns and Driers
• Hot Process vessels

Features: • Single Component
• Does not require a heat cure
• Rapid recoat in one hour
• Provides good early film hardness
• Excellent corrosion resistance

Apply To Hot Surfaces : No
Curing Requirements: Endcor 8895 is a 100% air dried material, no heat curing is required.
Temperature Resistant After Cure: 500°F (260°C)
Intermittent Peak Temperature: 500°F (260°C) Maximum
Continuous Temperature: 500°F (260°C)
Immersion: No
Insulated: No
UnInsulated Surfaces: Yes
Components: 1

Endcor® 8898

Dennis Aikman — Sun, 07 Oct 2012 15:37:00 GMT

Product Name: Endcor® 8898
HTML Title: Silicone Alkyd Self Priming Coating
Short Description: A high-performance, high solids, self priming, high gloss, hard, durable coating for use on cast steel surfaces. Coating is used on utility meters, valves, electrial meters, water meters, electrical boxes, pumps, machinery, motors, piping, fencing and storage tanks.
Tags: hot mix asphalt plant paint, silicone alkyd, DTM silicone alkyd, high heat silicone alkyd, asphalt plant paint, hot mix asphalt, high temperature silicone alkyd, asphalt drum paint, asphalt plant maintanence,
Prop 65 Warning: False
SDS: 8898 SDS 05032022
Data Sheet: 8898_Bulletin_070220
Description: A high-performance, high solids, self priming, high gloss, hard, durable coating for use on cast steel surfaces. Complies with state VOC (Volatile organic content) emission control regulations. Compared to conventional alkyd paints it provides a wide range of improved properties, including: significantly improved gloss retention and chalking resistance, reduce color fade, continuous film integrity, and temperature resistance.
Application Method: Brush|Roll
Generic Type: Silicone Alkyd Copolymer
Color: Colors
Common Uses:  Cast valve bodies
 Cast iron and steel surfaces
 Structural steel, pipes, and tanks
 Low temperature stacks
Features:  Long-term durability and weather resistance
 Excellent gloss and color retention
 Resistant to chalking, UV radiation, humidity, moisture, salt spray and chemical atmospheres
 Self priming corrosion protection
 Can be applied over solvent cleaned surfaces
Curing Requirements: Drying time @ 77F (25C)
To touch - 2 hours
To recoat - 16 – 24 hours
Final cure - 7 days
Immersion: No
Surface Preparation: To ensure optimum long-term coating system performance, surfaces must be clean, dry and free from oil, grease, dirt, salts, welding flux, mill scale, rust corrosion products, oxides, old paint, visible and nonvisible contaminants or other foreign matter. After completion of preliminary surface preparation work, clean all surfaces following “SSPC-SP 1 solvent cleaning standard” using a non-film forming solvent such as Dampney 170 cleaning solvent.
Mixing: Redisperse any settled-out pigments by thorough mixing to a uniform homogeneous consistency with an explosion proof or air driven power mixer. Do not open containers until ready. Keep Lid on container when not in use. use adequate air pressure and volume to obtain proper atomization. Do not thin beyond federal, state and/or local VOC (volatile organic compound) emission regulations. Note: Use of other thinner not approved by Dampney may hinder product performance and void product warranty, whether expressed or implied.
Thinning: Only thin Endcor 8898 with Dampney 105 Thinner a maximum of 5% by volume. Dampney 105 thinner can be used if encountering dry spray and for other application related conditions. When reducing Endcor 8898 for viscosity use thinners cautiously. The addition of a small amount of thinner will cause a large reduction in coating viscosity. Excessive thinning will impair wet film thickness and will cause runs and sags and change the VOC content of the coating. For conventional spray use adequate air pressure and volume to obtain proper
atomization. Do not thin beyond federal, state and/or local VOC (volatile organic compound) emission regulations. Note: Use of other thinner not approved by Dampney may hinder product performance and void product warranty, whether expressed or implied.
Components: 1
Dry Film Thickness per coat: 3.0 – 4.0 Mils (75 – 100 microns)
Wet Film Thickness per coat: 5.0 – 7.0 Mils (125 – 175 microns)
Clean Up: Thoroughly flush all application equipment and hoses immediately after use with Dampney 105 Thinner. Dismantle spray equipment and clean parts and brushes with Dampney 105 Thinner.
Theoretical Coverage: 240 sq. ft. per gallon (5.89 m²/liter)
Warning: FLAMMABLE LIQUID AND VAPOR.
Combustible Liquid and Vapor. Keep away from heat, sparks and flame. Vapors may cause flash fire. Do not breathe vapors or spray mist. Avoid contact with eyes, skin and clothing. Use with adequate ventilation during mixing and application. Wear an appropriate, properly
fitted organic vapor cartridge-type respirator (NIOSH approved) during and after application unless air monitoring demonstrates vapor/mist levels are below applicable limits. Follow respirator manufacturer’s directions for respirator use. Wash thoroughly after handling. Wear protective gloves, chemical safety goggles and impervious protective clothing. Use skin cream. In confined spaces it is required to use a positive pressure supplied-air respirator (NIOSH approved). Use explosion-proof lights and electrical equipment. Use only nonsparking tools and equipment. Wear conductive and nonsparking footwear. Make certain all electrical equipment is grounded. Observe all safety precautions and follow procedures described in OSHA regulations. See Safety Data Sheet (SDS) for complete precautionary and disposal information. If instructions and warnings cannot be strictly followed, do not use this product. If instructions and warnings cannot be strictly followed, do not use this product.

Endcor® 8898-0402

Joseph Aucoin — Tue, 18 Feb 2025 20:39:00 GMT

Product Name: Endcor® 8898-0402
HTML Title: Direct to Metal Coating - Stainless Steel Modified Silicone
SKU: 8898-0402
Short Description: A high-performance, durable stainless-steel coating for use on carbon steel surfaces in corrosive environments.
Tags: DTM, Stainless steel paint, 316 stainless steel paint, stainless steel coating, 316 stainless steel coating,
Prop 65 Warning: False
SDS: SDS_8898-0402
Data Sheet: 8898-0402_DTM_Bulletin 021725l
Application Method: Spray|Brush|Roll|Spray Preferred
Generic Type: Modified Silicone Alkyd
Color: Metallic Gray
Available Sizes: 1 Gallon|5 Gallon
Common Uses:  Pipes, tanks, racks and valves
 Structural steel and fabricated iron
 Hot process equipment such as furnaces, kilns, mixing drums and dryers
Features:  316L stainless steel flake provides long-term durability and corrosion resistance
 Offers continuous temperature resistance up to 300°F (149°C) with spikes to 350°F (177°C)
 VOC content of 2.49 lbs./gal. (299 g/l)
 Resistant to chalking, UV radiation, humidity, moisture, salt spray and chemical atmospheres
 Self-priming direct to metal capability makes Endcor 8898-0402 an ideal choice for OEM applications
 Can be applied over solvent cleaned surfaces
Surface Preparation: To ensure optimum long-term coating system performance, surfaces must be clean, dry and free from oil, grease, dirt, salts, welding flux, mill scale, rust, corrosion products, oxides, old paint, visible and non-visible contaminants or other foreign matter.

After completion of preliminary surface preparation work:

For mild corrosive environments clean all surfaces following “SSPC-SP 1 solvent cleaning standard” using a non-film forming solvent such as Dampney 170 cleaning solvent. Clean solvent and rags should be changed out frequently or as needed to ensure thorough cleaning.
For more aggressive corrosive environments to ensure optimum long-term coating system performance, surfaces must be clean, dry, and free from dirt, oil, grease, salts, welding flux, mill scale, rust, oxides, old paint, corrosion products, visible and non-visible contaminants, or other foreign matter.

Remove all surface imperfections that will induce premature coating system failure. Chip or scrape off weld splatter. Grind down sharp and rough welds, edges, gouges, slivers, and pits in accordance to NACE SPO178.

Abrasive blast surface per specification SSPC-SP- 10, (Near-White Metal Blast Cleaning), or per NACE Standard No. 2 to a profile depth of 1.0 - 2.0 mils (25-50µm). Abrasive used in blasting should be selected carefully from materials of mesh type and size required to produce the desired sharp anchor pattern.

If abrasive blasting is not permitted, prepare surface by power tool cleaning per SSPC-SP-11 (Power-Tool Cleaning to Bare Metal). Use an MBX Bristle Blaster or other type of power-tools to attain a sharp angular surface profile of 1.0 - 2.0 mils (25 - 50µm).

Note: Non-ferrous metals should be prepared in accordance to SSPC-SP-1 (Solvent Cleaning) with non-chlorinated solvents followed by preparation in accordance to SSPC-SP-16 or NACE 4 using non-metallic abrasives. A sharp angular surface profile depth of 1.0 - 2.0 mils (25 - 50µm). Consult Dampney Technical Service to determine the appropriate surface profile depth that is needed for the specific non-ferrous metal to be coated.
Customers are encouraged to test for suitability when applying over non-ferrous metals.
Mixing: Redisperse any settled-out pigments by thorough mixing to a uniform homogeneous consistency with an explosion proof or air driven power mixer. Do not open containers until ready. Keep Lid on container when not in use.
Thinning: Only thin Endcor 8898-0402 with Dampney 105 Thinner a maximum of 5% by volume. Dampney 105 thinner can be used if encountering dry spray and for other application related conditions. When reducing Endcor 8898-0402 for viscosity use thinners cautiously. The addition of a small amount of thinner could cause a large reduction in coating viscosity. Excessive thinning will impair wet film thickness and will cause runs and sags and change the VOC content of the coating. For conventional spray use adequate air pressure and volume to obtain proper atomization. Do not thin beyond federal, state and/or local VOC (volatile organic compound) emission regulations. Note: Use of other thinners not approved by Dampney may hinder product performance and void product warranty, whether expressed or implied.
Components: 1
Volume Solids: 50±2
Dry Film Thickness per coat: 2.0 – 4.0 Mils (50 – 100 microns)
Wet Film Thickness per coat: 4.0 – 8.0 Mils (100 – 200 microns)
Clean Up: Thoroughly flush all application equipment and hoses immediately after use with Dampney 105 Thinner. Dismantle spray equipment and clean parts and brushes with Dampney 105 Thinner.
Theoretical Coverage: Theoretical coverage at 4.0 mils (100µm) DFT - 200 sq. ft. per gallon (4.9 m²/liter)
Dry to Touch: 2 hours at 77°F
Dry Time to Recoat: Allow 16-24 hours dry time between coats
Dry Time to Ship: Allow 24 hours dry time prior to shipping and handling
Weight: Weight per Gallon - 10.8 lbs. (4.89 kg.)
Warning: DANGER: HIGHLY FLAMMABLE LIQUID AND VAPOR. Keep away from heat, sparks, and flame. Vapors may cause flash fire. Do not breathe vapors or spray mist. Avoid contact with eyes, skin and clothing. Use with adequate ventilation during mixing and application. Wear an appropriate, properly fitted organic vapor cartridge-type respirator (NIOSH approved) during and after application unless air monitoring demonstrates vapor/mist levels are below applicable limits. Follow respirator manufacturer’s directions for respirator use. Wash thoroughly after handling. Wear protective gloves, chemical safety goggles and impervious protective clothing. Use skin cream. In confined spaces it is required to use a positive pressure supplied-air respirator (NIOSH approved). Use explosion-proof lights and electrical equipment. Use only nonsparking tools and equipment. Wear conductive and nonsparking footwear. Make certain all electrical equipment is grounded. Observe all safety precautions and follow procedures described in OSHA regulations. See Safety Data Sheet (SDS) for complete precautionary and disposal information. If instructions and warnings cannot be strictly followed, do not use this product.
Description HTML Content:

Direct to Metal Coating

Utilizes 316L Stainless Steel Flake
Self-priming DTM technology makes Endcor 8898-0402 an ideal choice for OEM applications
Single component
VOC content of 2.49 lbs/gal (298 g/l)
Contains no isocyanates
Provides excellent corrosion resistance
Glossy UV resistant finish
Continuous heat resistance up to 300°F (149°C)
Suitable for shop or field application
Ideal for process equipment such as tanks, racks, piping, pumps, and valves
Brush, roller, or spray applied
Available in one gallon and five gallon containers