Thurmalox® 884 Brochure

Jim Dworchak — Fri, 10 Oct 2025 21:34:00 GMT

Product Name: Thurmalox® 884 Brochure
HTML Title: 884 Brochure
Short Description: A heat-resistant modified silicone coating designed primarily for temperature indicating applications requiring a distinct color change when applied to hot process equipment. The color change provided by Thurmalox 884/884C series indicates vessel or process overheating due to failure of refractory linings, system malfunction or bypassing of hot gases.
Tags: Temperature Indicating Paint, Temperature Indicating Coating, Refractory Hot Spots, Thermochromic Indicating Coating, Thermochromic Indicating Paint, thermoindicative,
Prop 65 Warning: False
Data Sheet: 884Series TIC Brochure
Spanish DataSheet: 884 series Spanish 2020[160997]
Description: A single component heat resistant silicone coating available in select colors designed to change or indicate at various temperatures.
Application Method: Spray|Brush|Roll
Generic Type: Modified Silicone
Color: Colors
Available Sizes: 1 Gallon|5 Gallon
Common Uses: Thurmalox 884/884C series coating can be applied over inorganic zinc rich primers, silicone primers, inert multi-polymeric matrix primers or in some cases direct to metal. Please consult Dampney Company for specific recommendations.
Features: Suited for both new construction or maintenance, these coatings offer fast dry times and are available in low VOC formulations. Thurmalox 884/884C series is easily recoated with itself, please see full product data sheets for specific instructions and surface preparation details.
Apply To Hot Surfaces : No
Curing Requirements: Thurmalox 884/884C series will air dry for shipping and handling. The coating will reach its full physical properties once placed into elevated temperature service.
Immersion: No
Insulated: No
UnInsulated Surfaces: Yes
Components: 1

Thurmalox® 884-082 Green

Dennis Aikman — Tue, 03 Nov 2015 17:28:00 GMT

Product Name: Thurmalox® 884-082 Green
HTML Title: Temperature Indicating Coating
SKU: 884-082 Green
Short Description: A heat-resistant modified silicone coating designed primarily for temperature indicating applications requiring a two stage irreversible color change. When applied to refinery and petrochemical process equipment which operate at elevated temperatures the color change provided by Thurmalox 884-082 indicates vessel overheating due to failure of refractory linings, system malfunction or bypassing of hot gases. Thurmalox 884-082 is suitable for maximum continuous operating temperatures up to 300˚F (149˚C).
Tags: Temperature Indicating Paint, Temperature Indicating Coating, Refractory Hot Spots, Thermochromic Indicating Coating, Thermochromic Indicating Paint,THERMOINDICATIVE,
Prop 65 Warning: False
SDS: 884-082 SDS 12142021
Data Sheet: 884-082 1015
Application Method: Spray|Brush|Roll
Available Sizes: 1 Gallon|5 Gallon
Immersion: No
Insulated: No
UnInsulated Surfaces: Yes
Components: 1
Description HTML Content:

Color Change Summary

Ambient to 300˚F (149˚C)	Green
356˚F (180˚C) - 428˚F (220˚C)	Green to Blue
590˚F (310˚C) - 662˚F (350˚C)	Blue to White

Thurmalox® 884-083 Green

Dennis Aikman — Tue, 03 Nov 2015 17:42:00 GMT

Product Name: Thurmalox® 884-083 Green
HTML Title: Temperature Indicating Paint
SKU: 884-083 Green
Short Description: A heat-resistant modified silicone coating designed primarily for temperature indicating applications requiring a two stage irreversible color change. When applied to refinery and petrochemical process equipment which operate at elevated temperatures the color change provided by Thurmalox 884-083 indicates vessel overheating due to failure of refractory linings, system malfunction or bypassing of hot gases. Thurmalox 884-083 is suitable for maximum continuous operating temperatures up to 350˚F (177˚C).
Tags: SCAQMD Rule 1113temperature indicating paint, temperature indicating coating, thermochromic paint, thermochromic coating, THERMOINDICATIVE,
Prop 65 Warning: False
SDS: 884-083 SDS 01182022
Data Sheet: 884-083 1015
Description: Temperature Indicating Paint
Temperature Indicating Coating
Thermo Indicative Paint
Thermal Indicating Paint
Available Sizes: 1 Gallon|5 Gallon
Components: 1
Description HTML Content:

Dampney Company’s Thurmalox 884 series line of temperature indicating coatings allows for a range of temperatures and colors which help to identify hot spots on refractory lined equipment, insulated equipment and process vessel overheating. Thurmalox 884 also has uses in the heat treating and OEM industries where an indicator is required as part of a heating or curing process.

Temperature Indicating Coatings

Very sharp, easily seen irreversible color change
One and two step color change options
Suitable for shop or field application
Available in standard 884 and low VOC 884C formulations
Acceptable for use on ferrous and non-ferrous metals
Can be recoated with itself after repairs
Applied over suitable inorganic zinc rich primers, heat resistant silicone primers or existing coated surfaces
Applied by brush, roller, conventional or airless spray methods
Contains no heavy metals
Thurmalox 884C products comply with SCAQMD Rule 1113 as a Color Indicating Safety Coating
Thurmalox 884C products comply with BAAQMD Definition 8-3-301 as a Temperature Indicating Safety Coating

Color/ Temperature Summary

Ambient to 350˚F (177˚C)	Green
425˚F (218˚C) - 475˚F (246˚C)	Green to Brown
580˚F (304˚C) - 620˚F (327˚C)	Brown to Red

Thurmalox® 884-090 Blue

Dennis Aikman — Tue, 03 Nov 2015 17:48:00 GMT

Product Name: Thurmalox® 884-090 Blue
HTML Title: 884-090 Blue
SKU: 884-090
Short Description: A heat-resistant modified silicone coating designed primarily for temperature indicating applications requiring a single stage irreversible color change. When applied to refinery and petrochemical process equipment which operate at elevated temperatures the color change provided by Thurmalox 884-090 indicates vessel overheating due to failure of refractory linings, system malfunction or bypassing of hot gases. Thurmalox 884-090 is suitable for maximum continuous operating temperatures up to 500˚F (260˚C) without color change.
Tags: SCAQMD Rule 1113temperature indicating paint, temperature indicating coating, thermochromic paint, thermochromic coating, THERMOINDICATIVE,
Prop 65 Warning: False
SDS: 884-090 SDS 2019
Data Sheet: 884-090 1015
Available Sizes: 1 Gallon|5 Gallon
Immersion: No
Insulated: No
UnInsulated Surfaces: Yes
Components: 1
Description HTML Content:

Color/ Temperature Summary

Ambient to 500˚F (260˚C)	Blue
590˚ (310˚C) to 650˚F (343˚C)	Blue to White

Thurmalox® 884C-085 Green

Jim Dworchak — Mon, 13 Oct 2025 14:14:00 GMT

Product Name: Thurmalox® 884C-085 Green
HTML Title: 884C-085
Short Description: A VOC compliant heat-resistant modified silicone coating system designed primarily for temperature indicating applications requiring a single stage irreversible color change. When applied to refinery and petrochemical process equipment which operate at elevated temperatures the color change provided by Thurmalox 884C-085 indicates vessel overheating due to failure of refractory linings, system malfunction or bypassing of hot gases. Thurmalox 884C-085 is suitable for maximum continuous operating temperatures up to 550˚F (288˚C) without color change.
Tags: SCAQMD Rule 1113 as a Color Indicating Safety Coating, BAAQMD Definition 8-3-301 as a Temperature Indicating Safety Coating, temperature indicating paint, temperature indicating coating, thermochromic paint, thermochromic coating, THERMOINDICATIVE,
Prop 65 Warning: False
Data Sheet: 884C-085
Application Method: Spray|Brush|Roll
Available Sizes: 1 Gallon|5 Gallon
Immersion: No
Insulated: No
UnInsulated Surfaces: Yes
Components: 1

Thurmalox® 884C-090 Blue

Jim Dworchak — Mon, 13 Oct 2025 14:21:00 GMT

Product Name: Thurmalox® 884C-090 Blue
HTML Title: 884C-090
Short Description: A VOC compliant heat-resistant modified silicone coating designed primarily for temperature indicating applications requiring a single stage irreversible color change. When applied to refinery and petrochemical process equipment which operate at elevated temperatures the color change provided by Thurmalox 884C-090 indicates vessel overheating due to failure of refractory linings, system malfunction or bypassing of hot gases. Thurmalox 884C-090 is suitable for maximum continuous operating temperatures up to 500˚F (260˚C) without color change.
Tags: SCAQMD Rule 1113 as a Color Indicating Safety Coating, BAAQMD Definition 8-3-301 as a Temperature Indicating Safety Coating, temperature indicating paint, temperature indicating coating, thermochromic paint, thermochromic coating,THERMOINDICATIVE,
Prop 65 Warning: False
Data Sheet: 884C-090
Application Method: Spray|Brush|Roll
Available Sizes: 1 Gallon|5 Gallon
Immersion: No
Insulated: No
UnInsulated Surfaces: Yes
Components: 1
Description HTML Content:

Color Change Summary

Ambient to 500˚F (260˚C)	Blue
590˚ (310˚C) to 650˚F (343˚C)	Blue to White

Apexior 1

Dennis Aikman — Thu, 16 Aug 2012 15:17:00 GMT

Product Name: Apexior 1
HTML Title: Steam Immersion Coating - Boiling Water
Short Description: One component, boiling water / steam immersion coating to 700F (371C)
Prop 65 Warning: False
SDS: Apexior 1 - SDS 01182019
Data Sheet: Apexior1-2025
Description: A steam resistant coating/lining formulated to protect carbon steel surfaces. Apexior Number One is designed for applications ranging from 200°F (93°C) up to 700°F (371°C) continuous. Typical applications for the product are carbon steel kilns, steam piping, steam traps, steam
coils and interior of boilers.
Common Uses: • Dry Kiln Coating
• Lumber Kiln Coating
• Kiln Seal Moisture Barrier
Features: • Air dries, easy to apply
• Excellent wettability properties
• Easily re-coatable
• Resistant to boiling water/steam to 700°F
• Increases heat transfer efficiency
• Outstanding resistance to thermal shock (immersion)
• Inert to water treatment
• Prevents corrosion in standby service
• Prevents scale buildup
• Surface tolerant features
Components: 1
Description HTML Content:

Apexior Number 1 is a single component, easy to apply air dry coating specifically formulated for the hot waterside corrosion prevention of metal surfaces. It is a coating that excels in severe thermal cyclic immersion service. Apexior Number 1 is resistant to continuous immersion in boiling water and steam from 200°F (93°C) to 700°F (371°C). It aids in the reduction and prevention of tight bonding of hard scale and allows for easy cleaning and removal of any scale buildup in steam generating equipment. Apexior Number 1 prevents pitting corrosion and stops corrosion that has already begun - except for badly pitted areas. It has outstanding wetting properties and adheres well to power tooled cleaned areas. Equipment coated with Apexior Number 1 will also see an increase in heat transfer efficiency. Apexior Number 1 performs ideally with water treatment in steam generating equipment.

Apexior 1C

Dennis Aikman — Thu, 16 Aug 2012 15:17:00 GMT

Product Name: Apexior 1C
HTML Title: Boiling Water - Steam Immersion Coating VOC
SKU: 001C
Short Description: One component, boiling water / steam immersion coating to 700F (371C)
SDS: Apexior1C
Data Sheet: 001C
Features: • Air dries, easy to apply
• Excellent wettability properties
• Easily re-coatable
• Resistant to boiling water/steam to 700°F
• Increases heat transfer efficiency
• Outstanding resistance to thermal shock (immersion)
• Inert to water treatment
• Prevents corrosion in standby service
• Prevents scale buildup
• Surface tolerant features
Components: 1
Description HTML Content:

Apexior 3

Dennis Aikman — Thu, 16 Aug 2012 15:20:00 GMT

Product Name: Apexior 3
HTML Title: Fresh or Salt Water Immersion Coating
Short Description: One component, fresh / salt water immersion coating from -40F to 140F (-40C to 60C)
Prop 65 Warning: False
SDS: 003-SDS-2019
Data Sheet: 003 2025
Application Method: Spray|Brush
Generic Type: Organic
Color: Black
Common Uses: • Chillers
• Cold water storage tanks
• Condenser heads and shells
• Inside shell of AC units
• Pump casings on fresh/salt water intakes
• Inner housings of pumps
• Sump pump pits and chain lockers
• Bilge and forepeak tanks
• Ballast and brine tanks
Features: • Air dries, easy to apply
• Excellent wettability properties
• Resistant to fresh/salt water
• Easily re-coatable
• Surface tolerant features
• Inert to water treatment
• Prevents scale buildup
Continuous Temperature: 140°F (60°C)
Surface Preparation: SSPC-SP 10
Components: 1
Volume Solids: 47%
Dry Film Thickness per coat: 3.5 - 4.0 mils (87 - 100 microns)
Wet Film Thickness per coat: 7.0 - 9.0 mils (175 – 225 microns)
Theoretical Coverage: 758 mil. sq. ft. per gallon
18 sq. m. @ 25 microns per liter
Application Temperature: 50°F-120°F (10°C-50°C)
Dry to Touch: 16-24 hours
Dry Time to Recoat: 16-24 hours
VOC Content: 3.44 lb./gal. (413 g./l.)
Dry Time to Ship: 7 days
Description HTML Content:

Apexior Number 3 is a single component, easy to apply air cure coating specifically formulated for the waterside corrosion prevention of metal surfaces. It has outstanding wetting properties and adheres well to power tooled cleaned areas. Apexior Number 3 is resistant to continuous immersion in fresh or salt water as well as frequently wet or high humidity environments. Apexior Number 3 prevents pitting corrosion and stops corrosion which has already begun - except for badly pitted areas. It aids in the reduction and prevention of tight bonding of hard scale and allows for easy cleaning and removal of scale buildup. Apexior Number 3 performs ideally with water treatment.

Apexior 3C

Dennis Aikman — Thu, 16 Aug 2012 15:20:00 GMT

Product Name: Apexior 3C
HTML Title: Fresh or Salt Water Immersion Coating VOC
SKU: 003C
Short Description: VOC - One component, fresh / salt water immersion coating from -40F to 140F (-40C to 60C)
Prop 65 Warning: False
SDS: Apexior3CSDS
Data Sheet: 003C 2025
Description: Apexior Number 3 is a single component, easy to apply air cure coating specifically formulated for the waterside corrosion prevention of metal surfaces. It has outstanding wetting properties and adheres well to power tooled cleaned areas. Apexior Number 3 is resistant to continuous immersion in fresh or salt water as well as frequently wet or high humidity environments.
Application Method: Spray|Brush
Generic Type: Organic
Color: Black
Common Uses: • Chillers
• Cold water storage tanks
• Condenser heads and shells
• Inside shell of AC units
• Pump casings on fresh/salt water intakes
• Inner housings of pumps
• Sump pump pits and chain lockers
• Bilge and forepeak tanks
• Ballast and brine tanks
Features: • Air dries, easy to apply
• Excellent wettability properties
• Resistant to fresh/salt water
• Easily re-coatable
• Surface tolerant features
• Inert to water treatment
• Prevents scale buildup
Continuous Temperature: 140°F (60°C)
Surface Preparation: SSPC-SP 10
Components: 1
Volume Solids: 47%
Dry Film Thickness per coat: 3.5 - 4.0 mils (87 - 100 microns)
Wet Film Thickness per coat: 7.0 - 9.0 mils (175 – 225 microns)
Theoretical Coverage: 758 mil. sq. ft. per gallon
18 sq. m. @ 25 microns per liter
Application Temperature: 50°F-120°F (10°C-50°C)
Dry to Touch: 16-24 hours
Dry Time to Recoat: 16-24 hours
VOC Content: 3.44 lb./gal. (413 g./l.)
Dry Time to Ship: 7 days
Description HTML Content:

Apexior Number 3 prevents pitting corrosion and stops corrosion which has already begun - except for badly pitted areas. It aids in the reduction and prevention of tight bonding of hard scale and allows for easy cleaning and removal of scale buildup. Apexior Number 3 performs ideally with water treatment.

Dampney #100 Thinner

Jim Dworchak — Mon, 13 Oct 2025 14:03:00 GMT

Product Name: Dampney #100 Thinner
HTML Title: Dampney #100 Thinner
Prop 65 Warning: False
SDS: 100 SDS 2024
Components: 1

Dampney #105 Thinner

Jim Dworchak — Tue, 28 Oct 2025 17:28:00 GMT

Product Name: Dampney #105 Thinner
HTML Title: Dampney #105 Thinner
Prop 65 Warning: False
SDS: 105 SDS 2020
Available Sizes: 1 Gallon|5 Gallon|55 Gallon
Components: 1

Dampney #112 Thinner

Jim Dworchak — Tue, 28 Oct 2025 17:27:00 GMT

Product Name: Dampney #112 Thinner
HTML Title: Dampney #112 Thinner
Prop 65 Warning: False
SDS: 112 SDS 2021
Available Sizes: 1 Gallon|5 Gallon|55 Gallon
Components: 1

Dampney #170 Chloride Free Surface Cleaner

Jim Dworchak — Mon, 13 Oct 2025 14:04:00 GMT

Product Name: Dampney #170 Chloride Free Surface Cleaner
HTML Title: Dampney #170 Chloride Free Surface Cleaner
Prop 65 Warning: False
SDS: 170 SDS 2024
Components: 1

Dampney #180 Thinner

Jim Dworchak — Fri, 05 Dec 2025 14:56:00 GMT

Product Name: Dampney #180 Thinner
HTML Title: Dampney #180 Thinner
Prop 65 Warning: False
SDS: 180 SDS 2024
Components: 1

Dymacryl 1100 Sierra Tone

Dennis Aikman — Fri, 07 Sep 2012 09:09:00 GMT

Product Name: Dymacryl 1100 Sierra Tone
HTML Title: Concrete Stain ~ Masonry Coating
SKU: 1100
Short Description: Concrete Stain | Masonry Coating | Masonry Paint
Form a protective barrier that is breathable, water repellent and color stable.
Tags: Dymacryl
Data Sheet: DYMACRYL
Description: Dymacryl Masonry Stains are formulated to beautify, extend the life, and preserve the appearance of above ground concrete and masonry. They impart excellent water repellency to a wide variety of surfaces, improving their resistance to the effects of freeze-thaw cycling and other types of damage and deterioration caused by excess water absorption. Dymacryl Masonry Stains are based on a combination of 100% acrylic polymers and copolymers, color stable inorganic pigments, and surface penetrating agents. They have outstanding resistance to weather and chemicals, have excellent penetrating properties and are resistant to peeling and flaking. They exhibit superior color retention and are resistant to fading, discoloration, and yellowing upon exposure to weather and ultraviolet radiation from sunlight.
Generic Type: Methyl methacrylate - ethylacrylate copolymer
Color: Colors
Available Sizes: Quart|1 Gallon|5 Gallon|35 Gallon|55 Gallon
Components: 1
Volume Solids: 21%

Elastoid 1300

Dennis Aikman — Mon, 17 Sep 2012 08:59:00 GMT

Product Name: Elastoid 1300
HTML Title: High-Build Coating and Vapor Barrier
SKU: 1300
Short Description: Corrosion-Resistant Elastomeric High-Build Coating and Vapor Barrier

Prop 65 Warning: False
SDS: 1300 SDS 10292019
Data Sheet: Elastoid_1300
Generic Type: Copolymer Rubber
Color: White|Custom Colors
Common Uses: • Waterproofing and vapor barrier applications
• Structural steel and metal buildings
• Process equipment and piping - chemical, fertilizer, food and pulp and paper industries
• Tank linings - chemical, water, waste treatment
• Storage tank exteriors - agricultural, chemical, water works
• Concrete - reservoirs, basins, sumps, troughs, spillage pads, flooring
• Heavy construction - docks and harbors, marine, mining
Components: 1
Volume Solids: 38%
Dry to Touch: 2
Dry Time to Recoat: 4-8
Description HTML Content:

Elastoid 1300 is a single-package, high-build, elastomeric coating and vapor barrier. It is formulated from multiphase synthetic rubber copolymers which interact to provide an unusual range of desirable chemical and physical properties.

It is tough, flexible, and corrosion-resistant and provides heavy-duty, long-term protection in highly aggressive chemical, industrial and marine environments. It has extremely low gas, water and water vapor permeability, and exhibits one of the lowest water vapor transmission rates possible with an elastomeric system. It is virtually unaffected by water immersion.

Elastoid 1300 exhibits high temperature resistance and will retain its flexibility at very low temperatures. It has high tensile strength and elongation, excellent impact and abrasion resistance, and is an excellent electrical insulator. It is unaffected by structural motion, or by stresses induced due to rapid thermal expansion and contraction of metal substrates.

In addition, it has outstanding weathering and aging properties and is resistant to attack by oxygen, ozone, UV light, bacteria, and fungi growths.

Endcor® 450

Dennis Aikman — Sun, 23 Sep 2012 12:45:00 GMT

Product Name: Endcor® 450
HTML Title: Rust Rinse, Metal Conditioner
SKU: 450
Short Description: Rust Rinse, Metal Conditioner
Prop 65 Warning: False
SDS: 450 SDS 09252020
Data Sheet: Endcor_450
Description: Rust Rinse 450 is a concentrated phosphoric acidbased corrosion removing and metal conditioning compound. When diluted with water and applied to metal surfaces it will remove rust and provide a slight etching action for ferrous and nonferrous metals. It converts the surface of steel to insoluble salts of phosphoric acid for the purpose of inhibiting corrosion and improving the adhesion and performance of paints and/or corrosion preventive compounds.
Generic Type: Phosphoric acid pretreatment
Common Uses: • Conditioner for ferrous and nonferrous metals prior to painting
• Rust remover for ferrous metals
• Blasted or pickled steel
• Galvanized steel or aluminum surfaces
Features: • Excellent wettability
• Quick rust penetration
• Uniform deposition of insoluble phosphate coating
• Provides uniform etching of surface

Rust Rinse 450 meets the requirements of Military Specification MIL-C-10578D, Type I, Corrosion Removing and Metal Conditioning Compound (Phosphoric Acid Base).
Temperature Resistant After Cure: 500°F (260°C)
Surface Preparation: SSPC-SP1
Components: 1
Volume Solids: 36%
Application Temperature: 50-120°F (10-49°C)
Dry to Touch: Not applicable
Dry Time to Recoat: 2 hr @ 50°F (10°C); 1 hr. @ 70°F (21°C);

Endcor® 460

Dennis Aikman — Sun, 23 Sep 2012 12:56:00 GMT

Product Name: Endcor® 460
HTML Title: Rust Converter
SKU: 01-460
Short Description: Rust Conversion used on steel surfaces and can be topcoated. Not intended for high temperatures.
Prop 65 Warning: False
SDS: 460 SDS 09252020
Data Sheet: Endcor_460
Generic Type: Water-borne Copolymer
Common Uses: • Used as a primer over surfaces which have minimal surface preparation
• Converts rust into a primed surface ready for priming or topcoating
• For use in industrial, marine, chemical, refineries, and pipeline
Features: • Outstanding adhesion to substrate
• Low permeability to water vapor and oxygen
• VOC compliant
• Tolerance for lower standards of surface preparation
• User friendly - single package system
Temperature Resistant After Cure: 120°F (49°C)
Surface Preparation: Apply Endcor 460 only over properly prepared surfaces. All loose rust should be removed by scraping, wire brushing and washed with water. Remove oil and grease by solvent wiping or cleaning with an alkaline detergent. Remove loose and flaking rust, mill scale and old paint by power or hand wire brushing, chipping and scraping. Follow by fresh water rinse to remove all residues.
Components: 1
Volume Solids: 43%
Dry Film Thickness per coat: 2-3 mils (50 - 75 microns)
Wet Film Thickness per coat: 5-7 mils (125 - 175 microns)
Theoretical Coverage: 687 @ 1 mil
Application Temperature: 60-85°F (16-29°C)
Dry to Touch: 30 minutes
Dry Time to Recoat: 40-60 minutes
VOC Content: 0.52 lb./gal. (62 g./l.)
Dry Time to Ship: 48 hours
Description HTML Content:

A water-borne copolymer that is designed for application to rusted ferrous metal surfaces. When properly applied the coating converts the rusted surface to a dark, stable organic iron compound. This product has a low permeability factor and is impermeable to oxygen and moisture while providing a rust free surface ready for priming or finish painting

It converts and primes rusted surfaces in one operation; dries to a hard, gloss finish combines excellent flexibility, toughness and impact resistance.

Endcor® 560C

Dennis Aikman — Sun, 23 Sep 2012 13:14:00 GMT

Product Name: Endcor® 560C
HTML Title: Multipurpose Alkyd Primer
SKU: 560C
Short Description: Multipurpose alkyd primer used for new construction and maintenance applications.
Prop 65 Warning: False
SDS: 560C SDS 05042021
Data Sheet: Endcor_560C
Description: Endcor 560C is a multipurpose alkyd primer used for new construction and maintenance applications. It can be applied over a wide range of coated and uncoated surfaces without lifting or softening the existing coating.
Application Method: Spray
Generic Type: Modified Alkyd
Color: Gray
Common Uses: • Shop primer for structural steel
• Structural steel-bridges, industrial plants
• Power plant structures, smoke stacks
• Refinery and chemical process plant structures
• Water and sewage works structures
• Paper mill structures
• Storage tank exteriors-water, petroleum, etc.
Features: • Outstanding adhesion to all substrates
• Excellent intercoat adhesion
• Compatible with numerous topcoat types
• Bonds well to old adherent paint films
• Prevents corrosion and undercutting
• Resists lifting by strong solvents
• High film build
Intermittent Peak Temperature: 200°F (93.3C)
Continuous Temperature: 150°F (65.6°C)
Surface Preparation: SSPC-SP-6
Components: 1
Volume Solids: 49%
Application Temperature: > 50°F (10°C)
Dry to Touch: 8-10 hours
Dry Time to Recoat: 24 hours
VOC Content: 3.44lb./gal. (412.8 g/l)
Dry Time to Ship: 72 hours
Description HTML Content:

An economical rust inhibitive primer for exterior and interior steel surfaces subjected to industrial and marine environments. It exhibits strong intercoat adhesion, serving as an outstanding tiecoat between previously applied adherent paint and chemically resistant topcoat systems containing active solvents.

Endcor® 700C

Dennis Aikman — Sun, 23 Sep 2012 12:33:00 GMT

Product Name: Endcor® 700C
HTML Title: Epoxy Polyamide Coating
SKU: 700C
Short Description: Epoxy-Polyamide Coating High Solids VOC Compliant
Prop 65 Warning: False
SDS: 700C A SDS 04272020
SDS - Part B: 700C B SDS 12292020
Data Sheet: Endcor_700C
Application Method: Spray|Brush|Roll
Generic Type: Epoxy-polyamide
Color: Colors|Custom Colors
Common Uses: Recommended Uses

• Structural steel
• Concrete
• Piping and tank exteriors
• Machinery and equipment
Continuous Temperature: 350°F (177°C)
Immersion: Yes
Surface Preparation: Prepare surface by methods suitable for exposure and service conditions.
Components: 2
Volume Solids: 67% (varies with color)
Dry Film Thickness per coat: 6 - 8 mils
Wet Film Thickness per coat: 8 - 11 mils
Theoretical Coverage: 1,070 mil. sq. ft./gal.
Application Temperature: 65-85°F (18-29°C)
Dry to Touch: 6 hours
Dry Time to Recoat: 24 hours
VOC Content: .83 lb/gal (99.6 g/l)

Endcor® 745

Dennis Aikman — Sun, 07 Oct 2012 15:40:00 GMT

Product Name: Endcor® 745
HTML Title: Polyamide-cured Epoxy Based Coating
SKU: 745
Short Description: Endcor 745 is a two-component, polyamide-cured epoxy based coating. It provides a tough, adherent, high-gloss, friction and corrosion resistant surface.
Prop 65 Warning: False
SDS: 745A SDS 04042021
Data Sheet: Endcor 745 bulletin
Components: 1

Endcor® 750C

Dennis Aikman — Sun, 07 Oct 2012 15:35:00 GMT

Product Name: Endcor® 750C
HTML Title: High Solids Low VOC Polyamide Epoxy Primer
Short Description: High Solids Low VOC Polyamide Epoxy Primer
Prop 65 Warning: False
SDS: 750C A SDS 2016
SDS - Part B: 750C B SDS 09102021
Data Sheet: 750C Jan 2013
Components: 1

Endcor® 772

Dennis Aikman — Sun, 07 Oct 2012 15:02:00 GMT

Product Name: Endcor® 772
HTML Title: Black Coal Tar Epoxy-Polyamide Coating
SKU: 772
Short Description: Endcor 772 is a two-component, polyamide cured, coal tar epoxy coating, recommended for long-term
protection against corrosion under extreme conditions. High-build, non-sagging films up to 16 mils thick can be achieved with a single-coat spray application.
Prop 65 Warning: False
SDS: 772A SDS 06052018
SDS - Part B: 772B SDS 11082021
Data Sheet: 772 bulletin
Components: 1
Description HTML Content:

Endcor 772 is a two-component, polyamide cured, coal tar epoxy coating, recommended for long-term protection against corrosion under extreme conditions. High-build, non-sagging films up to 16 mils thick can be achieved with a single-coat spray application.

Endcor 772 protects steel surfaces subjected to immersion in fresh or salt water, exposure in tidal or splash zones, or burial in soil. It is effective on the interiors of tanks and lines containing brine, crude oil, petroleum products, sewage or strong alkalies. It is resistant to a wide range of chemical fumes, mists and splashes. Suitability for prolonged immersion in specific chemicals should be determined by tests prior to use.

Endcor® 835

Dennis Aikman — Sun, 07 Oct 2012 15:36:00 GMT

Product Name: Endcor® 835
HTML Title: Zinc Rich Primer
Short Description: Zinc Rich Primer
Prop 65 Warning: False
SDS: 835A SDS 07052022
SDS - Part B: 835B SDS 2016
Data Sheet: 835
Components: 1